Abstract: In this paper, the static strength of a UAV blade made of composite material was calculated. Composite materials have an advantage over traditional materials (metals and alloys) in the field of aviation – gain in weight, low sensitivity to damage, high rigidity, high mechanical characteristics. At the same time, the identification of vulnerabilities in a layered structure is a difficult task and in practice is solved with the help of destructive control. Composite materials available in the ANSYS materials library were used in the modeling: Epoxy Carbon Woven (230 Gpa) Prepreg woven carbon fiber in the form of a semi–finished prepreg impregnated with epoxy resin carbon fiber with Young's modulus E=230 GPa and Epoxy Carbon (230 Gpa) Prepreg is a unidirectional carbon fiber prepreg impregnated with epoxy resin with a Young's modulus E=230 GPa. Modern software products, such as ANSYS WorkBench, allow comprehensive investigation of the layered structure. Several variants of blade designs with different fillers as the median material were investigated. The forward and reverse destruction criteria based on the Tsai-Hill theory were used. The influence of gravity was not taken into account. It is shown that the developed blade design meets the requirements. Balsa wood, pine, aspen and polyurethane foam were chosen as the middle material of the blade. Pine and aspen wood were selected according to the criteria of their availability and having the lowest density. The materials library of the ANSYS WorkBench software package used does not have characteristics for all of them, so the characteristics of the selected materials (pines and aspens) were added manually. For modeling and calculations in the ANSYS WorkBench program, such characteristics as density, axial elastic modulus, Poisson's coefficients, shear modulus and tensile and compressive strength limits are required.

Abstract: The article presents the results of determining the moisture-binding ability and plasticity of food products. Many indicators depend on the ability of meat and fish to bind moisture, including juiciness, tenderness, yield, loss during heat treatment, and appearance. The objects for research were Baikal omul, fresh and salted, beef meat in thawed condition. The moisture-binding ability and plasticity of the objects of study were evaluated by the pressing method. The paper presents the calculations performed using the traditional method and the method of digital processing of color images. Digital image processing was performed using a program developed by the authors, the article provides drawings and tables obtained during image processing. The undoubted advantage of the processing program compared to the traditional method is a significant reduction in time for processing images and the ability to process a large amount of data in a short time. When creating the necessary shooting conditions, the digital image processing method for determining the moisture-binding ability and plasticity of food products can be successfully used for laboratory research in determining the quality of meat and fish products.

Abstract: The article presents an algorithm for modeling a composite curve of the first order smoothness. The necessary formulas for determining the bypass consisting of arcs of third degree polynomials are given. The first option describes the approximation of the entire array of points with the requirement of incidence of the first and last points of the contour. The second option considers the modeling of a curve, with the requirement of incidence of the first point and the free end at the last point, using the principle of drawing curves. In the third variant, the curve must pass through the last point of the array, and at the first point it must meet the requirement of the first order of smoothness tangentially obtained in the previous step. Special points are preliminarily defined on the object - the breakpoint of the contour and points with vertical and horizontal tangents that impose smoothness conditions on the modeled bypass. To model a curve, the least-squares approximation is performed by third-degree polynomials on the set of ordered points bounded by the break points that make up the edge. The advantage of the developed contour modeling method is, firstly, the possibility of processing a large array of points with the observance of a given accuracy. Secondly, it is much easier to ensure the smoothness of the first degree of bypass compared to other methods that use various functions of connecting arcs of the bypass, and it is also important to significantly reduce the amount of data being processed, while maintaining the required specified accuracy. Further works will present the remaining options and formulas for the calculation and their application in the field of reverse engineering, in solving problems of geometric modeling in image processing.