Abstract: This article is devoted to the analysis of multilayer enclosing structures used for the construction of exterior walls of low-rise buildings based on a comparison of thermal and economic indicators. For the calculations in this article, the most relevant and popular multilayer wall designs are selected. The object of the study is the structural solutions of multilayer wall enclosing structures in low-rise housing construction, which are used in the city of Krasnoyarsk. The subject of the study is: the influence of the composition of multilayer wall enclosing structures with a similar heat flow on the estimated cost of their construction for the city of Krasnoyarsk and the estimated cost of 1 square meter of each wall structure is determined. At the moment, the construction of low-rise residential buildings is gaining popularity and is supported by state programs both at the federal level and at the levels of the subjects of the Russian Federation and municipalities. Low-rise housing construction is considered as one of the possibilities of solving the housing problem or improving housing conditions for the population. Multilayer enclosing structures with exterior facade decoration have been widely used in low-rise and multi-storey construction. As part of the study, we considered the most common types of multilayer structures and exterior wall facade finishing options, performed thermal engineering and cost estimates to determine the most profitable option for a multilayer wall structure in low-rise housing construction.

Abstract: The lightweight and porous building material has many advantages over conventional concrete, such as a higher strength-to-weight ratio, a lower coefficient of thermal expansion and good sound insulation. This article focuses on the historical periodization of the development of autoclaved aerated concrete and a literature review that focuses on the influence of porosity, vapor permeability and strength properties of a given building material. The subject of this research is the analysis of the key historical events and manufacturing technologies that influenced the creation and transformation of the structural components of autoclaved aerated concrete. In the course of research, the author revealed that although aerated concrete is a new material in construction, it appeared a long time ago. Initially, five thousand years ago, this composition of the material was used as a plaster and brickwork mortar; showing a positive effect in construction, the aerated concrete over the years took the form of a cellular block, and its characteristics continue to be discovered. The properties, composition and structure of autoclaved aerated concrete are being improved through its composition and geometry of the shape of block, which contributed to environmental friendliness of the new building material, its durability, and creation of comfortable living conditions for people. However, the material requires new rational manufacturing technologies are needed in order to improve its quality and characteristics.